Thursday, October 17, 2019

Madeleine Leininger -transcultural nursing theory model Research Paper

Madeleine Leininger -transcultural nursing theory model - Research Paper Example major reason leading her to forming the theory was her clinical specialist caring experience with children who were mildly disturbed and came from varied backgrounds (Allauigan, 2011). Factors like lack of doctor support, inadequate training, work burden and severity of illness of patients lead to elevated stress levels of nurses, which in turn leads to improper care of patients. Positive attitude results from holistic nursing approach, older age, and support, but negativity results from the load of work on the nurse (Kluit & Goosesns, 2011). The research will add to the literature of nursing theories. The research will aim at understanding a direct relationship between high levels of stress at work environment and the elevated negativity of attitude due to the stress. Keeping the theory of Trans-cultural nursing theory, it will also address the correlation that the negativity of attitude from nurses has on the recovery of children. The research will aim at the effects that cultural diversity has on the recovery rate of children, allowing for nurses to cater for those factors to aid in recovery. Allauigan, D. (2011). Theory Development and Historical Background. Leininger’s Theory of Culture Care. Retrieved January 1, 2013. Available at: http://nursingtheories.blogspot.com/2011/07/leiningers-theory-of-culture-care.html Kluit, V.D & Gossesns, (2011). Factors influencing attitudes of nurses in general health care toward patients with comorbid mental illness: an integrative literature review. Issues Ment Health Nurs. 32(8):519-27. Available at: http://www.ncbi.nlm.nih.gov/pubmed/21767254. Abstract Retrieved at January 1, 2013. Sitzman, K., & Eichelberger, L.W., (2012). Madeleine Leininger’s Culture Care: Diversity and Universality Theory. Understanding the Work of Nurse Theorists, A Creative Beginning. Jones and Bartlett Publishers:

Wednesday, October 16, 2019

MGMT 483 U5 IP IDP Research Paper Example | Topics and Well Written Essays - 500 words

MGMT 483 U5 IP IDP - Research Paper Example The first step in creating IDPs involves a rigorous brainstorming exercise that identifies the level of excellence in one’s current career, and consultation with one’s supervisor for effective guidance. Brainstorming should highlight the areas that exhibit poor performance, and potential ways of improvement. An individual should also consider the available opportunities that if utilized can help in personal development. Such opportunities include, but are not limited to available training and empowerment programs within the workplace. It is critical to highlight opportunities of formal education, such as further education that an individual registers interest in. After brainstorming, one should organize the ideas into goals, according to priorities (Jacobson, 2014). The most critical aspect of the creation of IDPs is the definition of strong goals. They should be specific, measurable, relevant, within an attainable reach, and bound by timelines. For example, one would h ighlight acquiring additional management skills through attending seminars in the next three months. The defined goals should conform to organizational objectives, and should highlight the required competencies, resources and time. An individual should also identify the available options for development, which may range from formal education, experiential learning, lessons from a coach or mentor and participation in group projects (Falcone, 2011). After the creation of an IDP, an individual should present it to the supervisor or mentor for final refining. An effective evaluation framework for assessing the success of the individual in the sectors highlighted should be developed. Evaluation seeks to establish whether IDPs presented any impact on the level of performance of the individual in the career, and other aspects of personal development. The evaluator should assess each aspect highlighted in the IDP, since all

Tuesday, October 15, 2019

PsychologyTransacial Adoption Essay Example | Topics and Well Written Essays - 2750 words

PsychologyTransacial Adoption - Essay Example These figures have grown substantially since those days and are likely to increase in the future. Evidently, such major sociological phenomenon could not but attract the attention of scholarly community. Research has covered the issues of ethnocentric bias, adjustment of adopted children, appearance discomfort, but largely focused on the problem of racial and cultural identity formation. The debate revolving around the question of whether White American parents should adopt children of different racial background was fueled by a position paper issued by the National Association of Black Social Workers (NABSW). Simon and Alstein (1977) clearly expressed the negative attitude of the Association toward the problem of transracial adoption labeling the placement of African American children - the most widespread group of children waiting for adoption in the U.S. - with the Caucasian families as 'cultural genocide' (p. 202). The NABSW's attitude toward transracial adoption was brilliantly illustrated by the following statement: " Black children should be placed only with Black familie s for adoption. Black children belong, physically, psychologically and culturally in Black families in order they receive the total sense of themselves and develop a sound protection of their future The socialization process for every child begins at birth. Included in the socialization process is the child's cultural heritage which is an important segment of the total process. This must begin at the earliest moment; otherwise [Black] children will not have the background and knowledge which is necessary to survive in a racist society. This is impossible if the child is placed with White parents in a White environment" (Simon & Alstein, 1977: 50) Although the NABSW position expressed three decades ago was made in a seriously different environment characterized by higher degree of interracial tensions some of the key arguments on which it relied did not become outdated. Thus, several relatively recent studies have demonstrated that African American families are likely to have difficulties preparing their children to succeed in the U.S. society characterized by the residuals of racist attitudes toward representatives of the minorities. Racial messages from the authorities, lower expectations at school, and prejudiced attitude from the low-enforcement officers are often listed among the most essential factors of influence in this regard (Bradley, 1998; Robinson & Ginter, 1999; Tatum, 1997). Presently, the views expressed by the scholars and child support organizations regarding the issue of transracial adoption gradually shift toward a more positive stance. Thus, the North American Council on Adoptable Children (NACAC) that includes more than 400 Canadian and American child advocacy organizations believes that racial background and ethnicity do play an essential role in socialization of a child: a family of the same racial or ethnic background is preferable for a child in terms of developing a set of effective strategies to cope with the racist attitudes still adopted by many American citizens. However, the NACAC also believes that

Monday, October 14, 2019

The study of design research methodology Essay Example for Free

The study of design research methodology Essay Abstract Studies on design research methodology are infrequent, although there is a consensus that more e ort is needed for improving design research quality. Previous calls for exercising better research methodology have been unsuccessful. As numerous studies reveal, there is no single scienti c methodology that is exercised in science or in any other research practice. Rather, research methodologies are socially constructed. Since some constructions are better than others for di erent purposes, it becomes valuable to study di erent methodologies and their in uence on research practice and results. Proposals for such studies are overed. 1 The state of design research methodology In many disciplines, research methodology is seldom discussed by researchers. Such neglect may result from several attitudes towards research methodology including indi erence or ignorance. Researchers may be indi erent because their research is well received by the community therefore they need not change or worry about it; or researchers may perceive their practice as science and wish to adopt as their methodology what they perceive to be the methodology used by scientists, henceforth referred to as the received scienti c methodology. Roughly, the received scienti c methodology consists  of several steps: (1) observations or preliminary studies, (2) hypothesis formation, (3) hypothesis testing, (4) hypothesis evaluation, and (5) hypothesis acceptance or rejection. It is asserted that results of research discovered by this methodology lead to applied research and subsequently, to practical impact. In contrast to this assertion, it is proclaimed that the goal of this methodology is to advance knowledge for its own sake and not address practical needs nor be responsible for delivering practical results. Most researchers would rarely question this methodology, but since it is impossible to follow or even hard to approximate, researchers who would claim to have adopted it, would not practice it.  Indi erence may be caused by ignorance; often researchers are not familiar with the details  of, and the controversies about, the received scienti c methodology. They are unaware of the alternatives of this methodology that we brie y mention later, their practice, and consequences. In fact, most researchers interpret methodology as a fancy synonym for method, while methodology is (or attempts to approximate) a compatible collection of assumptions and goals underlying methods, the methods, and the way the results of carrying the methods out are interpreted and evaluated. The ability to validate the attainment of research assumptions and goals through the evaluations is a critical factor in making the above collection compatible. The di erence in meanings assigned to the term methodology can be illustrated through an example from structural optimization. One research method of structural design involves the development of optimization procedures and their testings on benchmark problems. Most researchers will call this method \research methodology. However, the assumptions underlying such work (e.g., that optimization is a good model of structural design) and its testing (e.g., that simple benchmark problems are representatives of the complex structural designs performed by designers), or the believe that such research advances practice (e.g., that designers use optimization programs developed in research and that designers practice bene ts from them), are rarely articulated thus  rarely validated. If these issues would be addressed, the conclusions would probably contradict those implicit assumptions. First, independent of any discipline, optimization is a very restricted view of design (even with respect to Simons (1981) restricted view). Second, results obtained on simple benchmark problems do not necessarily transfer to real design problems nor do they re ect performance on other benchmark problems (Haftka and Sobieski, 1992); simple benchmark comparisons provide little understanding of the relative merit of di erent optimization procedures (Burns, 1989). Third, practitioners are very reluctant to use optimization procedures (Adelman, 1992; Haftka and Sobieski, 1992). This reluctance contradicts the implicit or stated research goals of improving structural design practice. Indi erence or ignorance towards research methodology relieve researchers from addressing such contradictions or exercising informed choices between methodologies in their research. Many researchers simply follow the method of their close senior peers without questioning or even knowing the assumptions that underlie it. In most cases, only the method|the actual research activity|is transferred to research apprentices. Thus, driven by social proximity, research assumptions become part of the implicit unarticulated research culture. Infrequently, this state of a airs had called the attention of researchers. In 1987, two representative papers critical of the state of design research practice were published, one by Antonsson (1987) and the other by Dixon (1987). Both papers advocated adopting the scienti c methodology in design research either for improving research quality or for improving design practice. These and other related papers elicit almost no response from the research community. Since their publication, the state of design research methodology has remained virtually unchanged. Such reaction raises at least two questions: what may have caused this response and if this is an expected reaction, is the state of research methodology worth additional discussions? Two plausible answers that originate from two di erent interpretations of Dixon and Antonssons papers justify further discussions. First, Dixon and Antonssons positions may have been interpreted as criticizing the intellectual de ciency of research and demanding from researchers to exercise a methodology di erent from the one they actually use and one that requires additional e ort. In particular, the methodology Transactions of the ASME, Journal of Mechanical Design, 1995, in press  proposed demanded researchers to seriously test their hypotheses. It might have been expected that such requests would be opposed to or, worst, be ignored. Second, researchers who are familiar with current views in the philosophy of science may have treated Dixon or Antonssons positions as being too simpli ed if they interpreted these positions as advocating for the received scienti c view. Since the stated goal of science is creating knowledge for the sake of knowing, but not necessarily knowledge that is relevant to practice, the received scienti c methodology may hinder improving practice by detaching the products of research ( i.e., design theories) from actual practice (Argyris, 1980; Reich, 1992). According to this interpretation and its limitation, previous calls for improving research methodology could not have impacted design practice even if researchers had adopted them. If design practice is indeed a goal of design research, di erent methodologies may be needed to establish a connection between research and practice (Reich et al, 1992; Reich, 1994a; Reich, 1994b). These methodologies can evolve in various ways including studying researchers activities and the way these activities correlate with research progress, thereby identifying the relationships between di erent assumptions, methods, and consequences. I have no intention to select between these two interpretations or to develop others but to explain how to improve research practice without assuming a xed methodology. To start with, we must acknowledge that there are di ering views about scienti c methodology (Kourany, 1987). In addition, we must  acknowledge studies on science and technology demonstrating that scienti c progress is in uenced by social, cultural, and political factors. Researchers in various sciences are increasingly acknowledging that knowledge is socially constructed (Pickering, 1992), and knowledge of design, in particular (Konda et al, 1992; Monarch et al, 1993). Moreover, the social in uence on research practice includes aspects such as: shaping research goals according to available grants or unarticulated interests; publishing papers to receive tenure or to justify traveling to conferences; and fraud (Bell, 1992; Broadbent, 1981). The rst studies on the social dimensions of science analyzed the progress of the \hard sciences such as chemistry or physics (Feyerabend, 1975; Kuhn, 1962). More recently, historical or re ective studies in science and engineering have begun addressing the social aspects underlying research and the need for di erent methodologies if practical impact is sought. These disciplines include: management science (Argyris, 1980), education (Guba, 1990), public policy (Palumbo and Calista, 1990), information systems (Bjerknes et al, 1987), cell biology (Grinnell, 1982), design in general (Broadbent, 1981), structural design (Addis, 1990; Timoshenko, 1953), solid mechanics (Bucciarelli and Dworsky, 1980), and even mathematics (DeMillo et al, 1979). Moreover, the social aspects manifested themselves in unexpected circumstances and in resolving seemingly trivial issues such as the implementation of computer arithmetic (MacKenzie, 1993)|the most basic infrastructure for much engineering design re search and practice. The importance of the aforementioned studies is twofold. First, they reject the received scienti c view as the means for formulating theories and as a means for improving practice. Second, they acknowledge and demonstrate that research methodology is a subject of study and constant improvement, and that gaining insight into the procedures of doing research can improve research itself. Since science is a social enterprise, the study of research methodology is mandatory for providing guidance in the maze of methodologies and in monitoring the quality of research. In order to sustain credibility, researchers must use and demonstrate that the techniques they develop in design research have some relevance to practice. Moreover, since funding  agencies Transactions of the ASME, Journal of Mechanical Design, 1995, in  press researchers to work towards improving design practice (National Research Council, 1991), researchers need to understand what kinds of studies are useful in practice, how are such studies conducted within budget limits, and which factors account for the di usion of studies results into practical engineering. 2 Studying research methodology Researchers may nd it fruitful to study: the objectives or goals of engineering design research; how can these objectives be ful lled through research; how can progress towards research goals be tested; and how can this overall process be improved. Such study will evolve a repository of methods with their assumptions, interpretations, successes and failures. This is the essence of studying engineering design research methodology. This view does not advocate for nor lead to anarchy. Furthermore, the evolving nature of methodology does not empty the usefulness of some principles for evaluating scienti c theories (e.g., such as those acknowledged even by Kuhn, 1987), nor does it mean that methodology is merely an art (Beveridge, 1957) that is not amenable to systematic study. It only acknowledges that the assumptions underlying methodologies and their potential e ectiveness and drawbacks for conducting certain types of research projects must be studied. We now illustrate the study of research methodology by elaborating some issues related to Antonssons six-step methodology (1987, p. 154). Each of the steps raises issues that need further study. These issues are not startling; some are familiar while others are not. Unfortunately, most of them are neglected all too often. (1),(2) Propose/hypothesize that a set of rules for design can elucidate part of the design process and develop those rules. Several questions arise about the actual execution of this activity. What is a good source of such rules? Are (un)successful designs (Petroski, 1989; Suh, 1990), patents previously issued (Arciszewski, 1988) or design textbooks (Aguirre and Wallace, 1990) good sources? Is studying human designers useful (Subrahmanian, 1992)? The answer is obviously a rmative; nevertheless, rarely are these sources consulted. If studying human designers is useful, how do di erent ways of studying a ect the usefulness of the rules hypothesized? Inarguably, such studies bring to bear research methods from psychology and sociology into play in design research. For example, how are designers activities being coded in observational studies? Is the coding scheme tested for reliability by using at lease two coders? Are the results statistically valid? Which criteria may be used for selecting candidate hypotheses for further testing? Can the subjective bias in th is selection be reduced? Note that the above questions raise a related question. Consider trading the quality of the design rules proposed with the resources to nd them. What kind of information is needed for making a sensible trade o and how can this information be collected and organized? (3) Have novice designers learn the rules and apply them. How is the above learning process taking place? Are the designers being taught thus introducing teachers bias? Or do they learn the rules on their own, potentially by solving Transactions of the ASME, Journal of Mechanical Design, 1995, in press  other design problems, thereby excluding the exercise of some measure of control? How are problems selected such that novice designers can solve them yet such that they are relevant to real practice. For that matter, how relevant is any laboratory experiment to real design? This critical question leads researchers in other disciplines as well as in design to use different  methods such as ethnography and participatory research while studying designers. See (Reich et al, 1992; Subrahmanian, 1992; Reich, 1994a) for additional details. Are benchmark problems used by di erent researchers to allow for the replication of results? Is performance on benchmark problems indicative of performance on other problems or on real design? Is it possible to replicate results relevant to real design? Can rules for multidisciplinary design be hypothesized and tested in the same manner? If the common view of science is adopted, this study must be controlled to be valid. One minimal requirement is that another group of designers participate in the study, potentially novice designers that did not study the new design rules. Note, however, that since the rst group of novice designers are trained with the new rules, the second group must receive similar training with default or irrelevant rules. Furthermore, members of the groups must not know which group was trained with the new rules. A better study may also include two groups of expert designers, one that learns the rules and another that learns the default rules. The latter may prov ide better indication about the relative merit of the new design rules with respect to existing design practice. In contrast, if the study follows a di erent methodology such as participatory research (Reich et al, 1992; Whyte, 1991), the nature of the study would change signi cantly into long-term case studies where real design problems are addressed. Exercising common scienti c methods in this methodology may damage research (Blumberg and Pringle, 1983). (4) Measure the design productivity of the rules. How is productivity being measured? Which criteria are included in the measurement: quality of design, time to design, or revenue of manufacturer? Do the measures used adhere to the principles of measurement theory (Roberts, 1979; Reich, 1995), or are they ad hoc and meaningless? Do independent designers than those who created the designs, or do potential customers, participate in this measurement?  Can the quality of design be assessed without manufacturing it and subjecting it to actual use? How relevant will abstract measurements be to practical  design? Is the measurement quantitative or is qualitative information being gathered as well? (5) Evaluate the results to con rm or refute the hypothesis. How is the measured data evaluated? What are the criteria that determine whether a hypothesis was con rmed or refuted? Are these criteria general or context dependent? Note that most philosophers of science including Popper and Kuhn reject the existence of such criteria (Weimer, 1979). Are the criteria correlated with real design? That is, could not researchers nd designers successfully employing design rules that were refuted by researchers? For example, Fritts et al. (1990, p. 478) describe engineers using theories that produce erroneous results with respect to experiments but that have a pragmatic utility of di erentiating between candidate designs. Are hypotheses really refuted or con rmed or are di erent hypotheses found to be useful Transactions of the ASME, Journal of Mechanical Design, 1995, in press  in different contexts? When is it possible to disregard experimental evidence in favor of keeping a hypothesis (Agassi, 1975)? When can experiments be harmful to progress (Truesdell, 1982)? Does a failure of a hypothesis constitute a failure of a research project or can it provide useful information worth reporting? Will archival journals publish such a report? (6) Re ne the hypothesis. The comments on items (1) and (2) apply here. Moreover, How does one diagnose a faulty hypothesis to accommodate empirical testing? When is re nement insu cient to address the failure of a hypothesis and a new \worldview must be adopted? The above expansion of Antonssons proposal re ects the complexity, richness, and necessity of studying research methodology. It illustrates that the design of a research activity is complex and di cult. It hints that  some activities that lead to research successes may fail other research and that some activities may not be compatible with some methodologies. Furthermore, research failure s (OR SUCCESSES) can lead to practical successes (or failures). Therefore, it is critical to identify where methods fail or succeed and in relation to which assumptions. Summary Science does not progress according to a distinctive methodology, nor could engineering design research; especially not if the goal is advancing design practice and not some abstract `understanding. Di erent research scenarios consisting of di erent goals, disciplines, and cultural settings, may call for di erent research methodologies for attaining the stated goals. Research involves design and therefore design researchers must be re ective continuously. This paper illustrated how researchers can be re ective upon their research methodology. If researchers object to such re ection, they risk losing credibility and, more importantly, lose the chance of discovering whether their work is meaningful. Acknowledgments The ideas expressed in this paper bene ted from discussions with Suresh Konda, Sean Levy, Shoulamit Milch-Reich, Ira Monarch, and Eswaran Subrahmanian. This work was done partly while the author was with the Department of Civil and Environmental Engineering, Duke University, Durham, NC. and the Engineering Design Research Center, Carnegie Mellon University, Pittsburgh, PA. References Addis, W. (1990). Structural Engineering: The Nature of Theory and Design, Ellis Horwood, New York NY. Adelman, H. M. (1992). \Experimental validation of the utility of structural optimization. Structural Optimization, 5(1-2):3{11. Agassi, J. (1975). Sciene in Flux, D. Reidel Publishing Company, Dordrecht. Transactions of the ASME, Journal of Mechanical Design, 1995, in press  Aguirre, G. J. and Wallace, K. M. (1990). \Evaluation of technical systems at the design stage. In Proceedings of The 1990 International Conference on Engineering Design, ICED-90 (Dubrovnik). Antonsson, E. K. (1987). \Development and testing of hypotheses in engineering design research. ASME Journal of Mechanisms, Transmissions, and Automation in Design, 109:153{154. Arciszewski, T. (1988). \ARIZ 77: An innovative design method. Design Methods and Theories, 22(2):796{ 820. Argyris, C. (1980). Inner Contradictions of Rigorous Research, Academic Press, New York, NY. Bell, R. (1992). Impure Science: Fraud, Compromise, and Political In uence in Scienti c Research, Wiley, New York, NY. Beveridge, W. I. B. (1957). The Art of Scienti c Investigation, Norton, New York, NY, Revised edition. Bjerknes, G., Ehn, P., and Kyng, M., editors (1987). Computers and Democracy: A Scandinavian Challenge, Gower Press, Brook eld, VT. Blumberg, M. and Pringle, C. D. (1983). \How control groups can cause loss of control in action research: The case of Rushton Coal Mine. Journal of Applied Behavioral Science, 19(4):409{425. Broadbent, G. (1981). \The morality of designing. In Design: Science: Method, Proceedings of The 1980 Design Research Society Conference, pages 309{328, Westbury House, Guilford, England. Bucciarelli, L. L. and Dworsky, N. (1980). Sophie Germain: An Essay in the History of Elasticity, D. Reidel, Dordrecht, Holland. Burns, S. A. (1989). \Graphical representations of design optimization processes. Computer-Aided Design, 21(1):21{24. DeMillo, R. A., Lipton, R. J., and Perlis, A. J. (1979). \Social processes and proofs of theorems and programs. Communication of the ACM, 22:271{280. Dixon, J. R. (1987). \On research methodology towards a scienti c theory of engineering design. Arti cial Intelligence for Engineering Design, Analysis and Manufacturing, 1(3):145{157. Feyerabend, P. K. (1975). Against Method, New Left Books, London, UK. Fritts, M., Comstock, E., Lin, W.-C., and Salvasen, N. (1990). \Hydro-numeric design: Performance prediction and impact on hull design. Transactions SNAME, 98:473{493. Grinnell, F. (1982). The Scienti c Attitude, Westview Press, Boulder, CO. Guba, E. G., editor (1990). The Paradigm Dialog, Sage Publications, Newbury Park, CA. Haftka, R. T. and Sobieski, J. (1992). \Editorial: The case for helping consumers of research. Structural Optimization, 4(2):63{64. Konda, S., Monarch, I., Sargent, P., and Subrahmanian, E. (1992). \Shared memory in design: A unifying theme for research and practice. Research in Engineering Design, 4(1):23{42. Kourany, J. A., editor (1987). Scienti c Knowledge: Basic Issues in the Philosophy of Science, Wadsworth, Belmont, CA. Kuhn, T. S. (1962). The Structure of Scienti c Revolution, The University of Chicago Press, Chicago, IL. Kuhn, T. S. (1987). \Objectivity, value judgment, and theory choice. In Kourany, J. A., editor, Scienti c Knowledge: Basic Issues in the Philosophy of Science, pages 197{207, Belmont, CA, Wadsworth. MacKenzie, D. (1993). \Negotiating arithmetic, constructing proof: The sociology of mathematics and information technology. Social Studies of Science, 23(1):37{65. Transactions of the ASME, Journal of Mechanical Design, 1995, in press  Monarch, I. A., Konda, S. L., Levy, S. N., Reich, Y., Subrahmanian, E., and Ulrich, C. (1993). \Shared memory in design: Theory and practice. In Proceedings of the Invitational Workshop on Social Science Research, Technical Systems and Cooperative Work (Paris, France), pages 227{241, Paris, France, Department Sciences Humaines et Sociales, CNRS. National Research Council (1991). Improving Engineering Design: Designing For Competitive Advantage, National Academy Press, Washington, DC. Palumbo, D. J. and Calista, D. J., editors (1990). Implementation and The Policy Process: Opening Up The Black Box, Greenwood Press, New York, NY. Petroski, H. (1989). \Failure as a unifying theme in design. Design Studies, 10(4):214{218. Pickering, A., editor (1992). Science as Practice and Culture, The University of Chicago Press, Chicago, IL. Reich, Y., Konda, S., Monarch, I., and Subrahmanian, E. (1992). \Participation and design: An extended view. In Muller, M. J., Kuhn, S., and Meskill, J. A., editors, PDC92: Proceedings of the Participatory Design Conference (Cambridge, MA), pages 63{71, Palo Alto, CA, Computer Professionals for Social Responsibility. Reich, Y. (1992). \Transcending the theory-practice problem of technology. Technical Report EDRC 12-51-92, Engineering Design Research Center, Carnegie Mellon University, Pittsburgh, PA. Reich, Y. (1994). \Layered models of research methodologies. Arti cial Intelligence for Engineering Design, Analysis, and Manufacturing, 8(4):(in press). Reich, Y. (1994). \What is wrong with CAE and can it be xed. In Preprints of Bridging the Generations: An International Workshop on the Future Directions of Computer-Aided Engineering, Pittsburgh, PA, Department of Civil Engineering, Carnegie Mellon University. Reich, Y. (1995). \Measuring the value of knowledge. International Journal of Human-Computer Studies. (in press). Roberts, F. S. (1979). Measurement Theory with Applications to Decisionmaking, Utility, and the Social Sciences, Encyclopedia of Mathematics and its Applications, Vol. 7, Addison Wesley, Reading, MA. Simon, H. A. (1981). The Sciences of The Arti cial, MIT Press, Cambridge, MA, 2nd edition. Subrahmanian, E. (1992). \Notes on empirical studies of engineering tasks and environments, invited position paper. In NSF Workshop on Information Capture and Access in Engineering Design Environments (Ithaca, NY), pages 567{578. Suh, N. P. (1990). The Principles of Design, Oxford University Press, New York, NY. Timoshenko, S. P. (1953). History of Strength of Materials: With a Brief Account of the History of Theory of Elasticity and Theory of Structures, McGraw-Hill, New York, NY. Truesdell, C. (1982). \The disastrous e ects of experiment upon the early development of thermodynamics. In Agassi, J. and Cohen, R. S., editors, Scienti c Philosophy Today: Essays in Honor of Mario Bunge, pages 415{423, Dordrecht, D. Reidel Publishing Company. Weimer, W. B. (1979). Notes on the Methodology of Scienti c Research, Lawrence Erlbaum, Hillsdale, NJ. Whyte, W. F., editor (1991). Participatory Action Research, Sage Publications, Newbury Park, CA. Transactions of the ASME, Journal of Mechanical Design, 1995, in press

Sunday, October 13, 2019

Perraults Puss in Boots :: Perrault Puss Boots Essays

Perrault's Puss in Boots The myriad characters in every fairy tale each contribute a great deal to the plot structure, their slightest actions bringing forth a favourable or grievous outcome. The overall sense of a story lies almost entirely on what is included in their dialogue and descriptions. In comparing the well known Rapunzel, as told by the brothers Grimm, to a lesser known version Petrosinella, by Giambattista Basile, a reader can distinguish each as unique based on these elements. Further analysis reveals what all characters donate to create each storyline, as well as a pair of equally distinctive endings. The Grimm Rapunzel is remarkably descriptive when compared with the 1637 Basile variation. The Grimm’s introduce a man and wife that have long wished for God to grant them a child, going on to describe the beauty of the neighbour's garden and the wife’s long and intense yearning for the rapunzel. What takes the better part of a page in Rapunzel condenses into three short sentences in Petrosinella, which comes across as far more abrupt. The first character is introduced, sees what she wants next door, and craves it; no other clarification is provided. The opening sentence states that â€Å"there lived a woman named Pascaddozia, who was pregnant.† Already there are three factors not present in the Grimm tale. Firstly, the woman is living alone-there is never mention of a husband. Second, she is named, which is very unusual in any fairy tale because the parent(s) often have a very small role overall and are not so important as to have names. Third, she is with child, and we are given no indication that there were the classic problems of conceiving. These points summon an image of a strong, single mother, more significant in the life of her child than the Grimm’s couple. Rapunzel describes how the man yields to his wife and fetches her some of the herb from the witch’s garden. Pascaddozia, however, steals into the garden several times to indulge her cravings. This bravery shown by the mother again reflects on how different she is from the Grimm wife, a trait that is revealed in her daughter Petrosinella. The witches also differ in each tale. Petrosinella portrays a rather slow-witted antagonist that behaves with more fury. Reacting to the theft in her garden, this one vows revenge if she catches the culprit.

Saturday, October 12, 2019

Saving the Ballona Wetlands Essay -- California Nature Environmental E

Before development exploded in California, the state contained about 5 million acres of wetland habitat. Unfortunately, over the years California has been willing to part with 91 percent of its wetlands, Southern California having lost 95 percent. Los Angeles County has only one wetland remaining. This being the Ballona Wetlands located between Marina del Rey and the Westchester bluffs, it was once a major part of California’s natural wetland systems. Before development, Ballona wetlands natural habitat covered 2002 acres. This area, 800 to 1000 acres, referred to as Playa Vista by its owners is made up of salt marsh freshwater marsh and part upland and dune areas. It is considered Los Angeles’ largest ‘wetland ecosystem’. Although degraded over the years it still functions as a normal natural wetland - providing vital services. A major function it provides is that it filters out toxic wastes and pollutants from stormwater runoff before they reach the Santa Monica Bay. It is "a coastal plain, and acts as a flood plain for the surrounding area" (FOBW Information folder 1998: Fact Sheet). Ballona is an integral part of the Pacific flyaway, providing vital feeding and nesting habitat for over 185 species of birds, including some on the federal endangered species list. The southwestern willow flycatcher, an endangered species, was just recently seen by developers in an area cleared for construction. Ballona is no doubt a welcomed refuge to all species, both flora and fauna, from the industrial landscape of Los Angeles. The Friends of Ballona Wetlands have said it is "a spawning ground for commercial and sport fish, and a vital source of nutrients for the entire coastal marine environment" (FOBW Information folder 1998: 20 years of C... ...na Wetlands." http://eco.bio.lmu.edu/www.ballona/fbw.htm. 22 Jan. 98. Friends of Ballona Wetlands Information Folder. "Friends of Ballona Wetlands: 20 years of Commitment," "Fact Sheet," "Mission Statement: Friends of Ballona Wetlands" 1998. Helgeson, Rubell. Commentary. "A Phony War to Save the Ballona Wetlands." Los Angeles Times 6 Dec. 1996: B10. Lynch, Glen. Interview. The Ballona Free Press. [Westchester] May. 1997: 2. Tagawa, Rick. "History of the Ballona Valley." The Ballona Free Press. [Westchester] Nov. 1997: 2. Additional References not cited Ballona Land Trust Mission Statement http://www.life.net/wetlands/bmission.html Effort To Protect Ballona Wetland Moves Forward http://www.house.gov/harman/flapgate.htm Protestors Target Spielberg, ‘Lost World’ http://www.channel2000.com/news/stories/news-970520-202436.html

Friday, October 11, 2019

Health Information Exchange: Benefits and Concerns Essay

Health Information Exchange is the electronic transmission exchange from one health care professional to another. Health Information Exchange allows health care professionals and patients to appropriately access and securely share patient’s medical information electronically. Our industry is been working hard in the process and development of this new process, for the benefit of the patient and healthcare professionals. Some individuals with access to HIE are physicians, nurses, pharmacists, medical assistants, medical biller and coders and so forth. It is important to have an understanding about different health care professionals having access to the patient medical record. HIE benefits include: Provides improvement for quality and safety of patient care by reducing prescription and medical errors. The education and orientation to patients’ involvement in their own health care. Increases efficiency by eliminating unnecessary paperwork. Provides caregivers with clinical decision support tools for more effective care and treatment. Eliminates redundant or unnecessary testing. Improves public health reporting and monitoring. Creates a potential loop for feedback between health-related research and actual practice. Facilitates efficient deployment of emerging technology and health care services. Provides the backbone of technical infrastructure for leverage by national and State-level initiatives. Provides a basic level of interoperability among electronic health records (EHRs) maintained by individual physicians and organizations. Reduces health related costs (The benefits & risks of health information exchange & health information technology. (n.d.). The first step in EHR implementation is to conduct an assessment of your current practice and its goals, needs, and financial and technical readiness. Your practice can design an implementation plan that meets the specific needs of your practice. Eligible health care professionals and eligible hospitals must use certified EHR technology in order to achieve meaningful use and qualify for incentive payments. It is important in an EHR when working in the implementation process to involve, training, mock â€Å"go-live,† and pilot testing for system improvement. (HIE benefits) The final phase of EHR implementation includes successfully attesting to demonstrating meaningful use of EHRs, and reassessing what you have learned from training and everyday use of the system implementation to continue improving workflows that achieve the individual practice’s goals. The process and steps to follow on an HER system, most health care providers are covered entities, and thus, need HIPAA responsibilities for individually identifiable health information. Your leadership especially emphasizing the importance of protecting patient health information is vital to your privacy and security activities. HIPAA requires covered providers to designate an individual for both a privacy and a security officer on their staff and delegate the responsibility of security system in a practice. Documentation shows why and where you have security measures in place, how you created them, and what you do to monitor them. Create a paper or electronic folder for your practice medical records. The Center of Medicare Services advises all providers that attest for the EHR incentive programs to retain all relevant records that support attestation. These records will be essential if you ever are audited for compliance with HIPAA or an EHR incentive program. (Anthony, R. (2013, September 19). Cms and ehealth.) Risk Analysis Plan compares your current security measures to what is legally and  pragmatically required to safeguard patient health information. The risk analysis identifies high priority threats and vulnerabilities on EHR. You or a security risk professional can conduct your practice’s risk analysis, but you either way you will want to know what to expect. Often, basic security measures can be highly effective and affordable. Using your risk analysis results, discuss and develop an action plan to mitigate the identified risks. The plan should have five components: administrative, physical, and technical safeguards; policies and procedures; and organizational standards. (Health information exchange: Is your privacy protected?. (2012, July) Every practice should develop a Risk Management Plan. It is the practice responsibility to develop written and up-to-date policies and procedures about how your practice protects e-PHI. All these records should be retained on all outdated policies and procedures for future audits on your practice. For the security of patient health information (PHI), your workforce must know how to implement your policies, procedures, and security audits. HIPAA requires you as a covered provider to train your workforce on policies and procedures. Also, your staff must receive formal training on breach notification. (Health information exchange: Is your privacy protected? (2012, July) Your patients may be concerned about confidentiality and security of health information on an EHR. Emphasize the benefits of EHRs to them as patients, perhaps using patient education materials available in the Privacy & Security Resources section. Do not register and attest for an EHR Incentive program until you have conducted your security risk analysis (or reassessment) and corrected any deficiencies identified during the risk analysis. Document these changes/corrections. Providers participating in the EHR Incentive Program can be audited. When you attest to meaningful use, it is a legal statement that you have met specific standards, including that you protect ePHI. Work with your EHR vendor(s) to let them know that protecting patient health information and meeting your HIPAA privacy and security responsibilities regarding electronic health in formation in your EHR is one of your major goals. Involve your practice staff and any other partners that you have to help streamline this process. HIPAA privacy regulations Health Insurance Portability and Accountability Act of 1996 (â€Å"HIPAA†). The Privacy Rule standards address the use and disclosure of individuals’ health information—called â€Å"protected health information† by organizations subject to the Privacy Rule — called â€Å"covered entities,† as well as standards for individuals’ privacy rights to understand and control how their health information is used. Within HHS, the Office for Civil Rights (â€Å"OCR†) has responsibility for implementing and enforcing the Privacy Rule with respect to voluntary compliance activities and civil money penalties. HITECH The Health Information Technology for Economic and Clinical Health (HITECH) Act, enacted as part of the American Recovery and Reinvestment Act of 2009, was signed into law on February 17, 2009, to promote the adoption and meaningful use of health information technology. Subtitle D of the HITECH Act addresses the privacy and security concerns associated with the electronic transmission of health information, in part, through several provisions that strengthen the civil and criminal enforcement of the HIPAA rules. Standards & Interoperability The work promoting the adoption and uptake of health information technology is the key to ensuring the goals of the HITECH Act. But work being done to ensure that the technical standards and specifications are in place to support this technology is also critical to the development and success of a fully functional nationwide health IT ecosystem. Some of the Risks of HIE include: Identity Theft Although health information benefits from all the security measures developed in other economic areas such as defense and finance, it has the same risks these other areas have experienced. Identity theft can occur with both paper files and electronic files, but a breach of electronic files may affect more records than a breach of paper files. Errors Just like a paper health record, if the health care provider does not enter the correct information, that information remains in the health record until it is corrected. Electronic information can provide checks and balances that  paper health records cannot. Hackers Electronic health care information benefits from the security measure developed by other industries. Health care is the last frontier of information technology, so anti-hacking security measures from other economic areas are already used. However, hackers will continue to try to break security codes just like they do in other electronic systems. Encryption Covered entities must encrypt protected health information when it â€Å"is a reasonable and appropriate safeguard.† When the HIPAA Security Rule was implemented in 2002, encryption was high in cost and challenging to use. The result is that many covered entities still do not encrypt their data. With the enormous amount of personal medical information that will be moving around electronically as HIE gets underway and spreads, the U.S. Department of Health and Human Services (HHS) needs to make encryption a requirement and set standards for its use in all practices. Personal mobile devices Smartphones, tablets and USB drives are ubiquitous. Health care providers often use their own unsecured devices to record and transmit unencrypted work-related health information. The speed with which such devices have been adopted is well ahead of policies that govern their use. According to a number of recent studies, the vulnerability of mobile devices is already playing a significant role in medical data breaches. The cloud That is, remote servers where more and more businesses are moving their data—will be essential in an era of electronic health information exchange, if for no other reason than the staggering quantities of data that digitizing the medical records of the entire U.S. population will create. Health care providers may also want to host their patient portals on cloud-based servers. Patient portals are websites where patients can access their medical records and exchange email with their providers. Cloud services are developing more quickly than laws or regulations can address. As a patient you’re unlikely to know where your medical records actually reside. And you’re forced to rely on the security practices of others to  protect the privacy of your information. The Privacy Rule gives you, with few exceptions, the right to inspect, review, and receive a copy of your medical records and billing records that are held by health plans and health care providers covered by the Privacy Rule. Only you or your personal representative has the right to access your records. A health care provider or health plan may send copies of your records to another provider or health plan as needed for treatment or payment or as authorized by you. However, the Privacy Rule does not require the health care provider or health plan to share information with other providers or plans. You do not have the right to access a provider’s psychotherapy notes. Psychotherapy notes are notes taken by a mental health professional during a conversation with the patient and kept separate from the patient’s medical and billing records. The Privacy Rule also does not permit the provider to make most disclosures of psychotherapy notes about you without your authorization . Because HIE’s primary purpose is to improve the quality of medical care, your health care providers’ priorities are to gain and allow access to a comprehensive record of your medical history. When the U.S. Department of Health and Human Services (HHS) finalizes its â€Å"accounting of disclosures† rule, providers that maintain EHRs will have to account to you for all disclosures of your personal health information that it makes for purposes of treatment, payment, and business operations for three years prior to the date of your request. (Health information exchange brief examines privacy and security concerns. (2012, June 13). Until HHS’ rule is final, you can get an accounting that goes back six years prior to your request, but this DOES NOT include disclosures for treatment, payment, or business operations. Therefore the disclosures you are currently able to get may seem largely incomplete and irrelevant to the purposes for which you want them. You also have access to your own medical records (apart from psychotherapy notes about you), but you must request them directly from your providers. It is not possible to request your records through an HIE. It has to be in person from the practice you are requesting medical records from. However, your doctor should be able to give you—or will soon be able to give you—what’s called a Continuity of Care Record (CCR) after each visit. The CCR is a summary of the most relevant and up-to-date facts about your care and treatment with that provider. A CCR can be helpful for you, and can also  provide a current snapshot of your medical status for the next doctor you visit. A CCR may be transmitted either on paper or electronically. HIE is a tremendous tool to utilize in the healthcare industry. However, different challenges still existing now days. Effective and Affordable Technology is a big issue and the primary problem. HIE required costly network, connections hardware, software and so forth. Some practices including hospitals can’t afford the cost of technology. Providers are trying to save in cost of information transmission and are always looking for inexpensive vendors. Practices are also working on overcoming these obstacles, but are very hard to overcome. HIEs can support care management by making it possible to generate patient reports for use at the point of care. It may also be easier to identify patients who are not following a prescribed care regimen or not meeting its goals, and to measure how well providers are delivering recommended care. This all goes along with the government’s goal of shifting the health care payment model from one of fee for service to payment based on outcomes; that is, not just whether you saw a doctor but whether you benefited from seeing her. The goals of HIE are to improve the quality of care and make delivering it more efficient and cost-effective. Once electronic medical records are available everywhere, for all patients, though, it is inevitable that more people will want access to this data. It is a goldmine for medical research and all kinds of statistical analysis, for example. Conclusion HIE will continue providing planning and implementation within health care organizations. We must comply as HIM professionals providing the best of our knowledge to contribute in this process. Also we need to follow HIPPA policies and procedures in our place of employment and commit ourselves to meet our goal which is providing the best on patient care. The more we work as a team; at the end of the road it will be easier on us to have our job done and accurate at the end of the road. Avoiding errors is also our responsibility as an HIM professionals. Let’s not focus on productivity, which is important, but also let’s put ourselves in the patient’s situation. We are also patient’s and we like to have things done the right way. References Rhodes, H. (2013, August 05). Seven unintended consequences of electronic HIE. Retrieved from http://www.healthit.gov/policy-researchers-implementers/reports HIE benefits. (n.d.). Retrieved from http://www.healthit.gov/providers-professionals/health-information-exchange/hie-benefits The benefits & risks of health information exchange & health information technology. (n.d.). Retrieved from http://www.nchica.org/GetInvolved/CACHI/HIEbenefits-risks.htm Anthony, R. (2013, September 19). Cms and ehealth. Retrieved from http://www.cms.gov/eHealth/downloads/Webinar_eHealth_September19_CMSeHealthOverview.pdf Health information exchange: Is your privacy protected?. (2012, July). Retrieved from https://www.privacyrights.org/fs/fsC6/CA-medical-HIE Health information exchange brief examines privacy and security concerns. (2012, June 13). Retrieved from https://www.cdt.org/pr_statement/health-information-exchange-brief-examines-privacy-and-security-concerns